COMMERCIAL REVERSE OSMOSIS

Flow rates designed on temperatures of 25°C or 77°F
Steel epoxy painted frame is standard (stainless steel frame is optional)
1” NPT Burkert Inlet Solenoid Valve
1” NPT high pressure prefilter housing c/w pressure release 500 PSI burst pressure, 125 PSI maximum operating pressure, 20” long
4 1/2” x 20” 5 micron polypropylene prefilter replacement cartridge
stainless steel high pressure booster pump c/w TEFC motor
Low pressure pretreatment plumbed in PUC pipe and fittings
High pressure tubing with stainless steel fittings from booster pump through membrane system
Flow meters measuring product water, recirculation and waste
Stainless steel oil filled pressure manual control valve to increase and decrease pump pressure waste water and recirculation for up to 80 percent waste water reduction controlled by recirculation flow meter
Low pressure feed water pressure switch
High pressure feed water pressure switch
Stainless steel membrane housings with end caps
4” by 40” low energy high quality thin film composite reverse osmosis membranes
MICROPROCESSOR CONTROLLER STANDARD FEATURES:
Multifunction key pad
Display backlit LCD (4 lines / 20 character)
Visual and Audible alarms
Monitoring via PC
Programmable time delays and setpoints
All readings are field programmable for metric and US valves
Write protected setpoints
High/low pressure automotive reset alarm silence
Non metallic Nema 4x enclosure
12” x 10” x 6” (305mm x 254mm x 152mm)
Panel mount

Please Contact Us to purchase any of these items or for a quote on any specialized commercial application.